User manual ZLIN Z50 (120) SEAGULL JP-5500070

www.seagullmodels.com
25
C/A glue.
Rudder control horn.
Elevator control horn.
Elevator control horn.
Rudder control horn.
A.
C/A glue.
Control horn.
Elevator pushrod.
Metal clevis.
M2 lock nut.
Rudder pushrod.
Control horn.
A.
A.
 8) With both the rudder servo and rudder
centered, mark the rudder pushrod at the hole
it crosses in the rudder servo arm using a felt-
tipped pen.
 9) Enlarge the outer hole in the rudder servo
arm using a drill bit. Bend the pushrod wire at
the mark made in the last step. Pass the wire
through the servo arm and secure it using a
nylon wire keeper. Remove any unused arms
from the servo horn.