Specifications

GROB TUTOR G115 Instruction Manual.
12
2) Use a pin drill and 2mm drill bit to drill a
small indentation in the mount for the engine
mounting screw.
110mm.
MOUNTING THE ENGINE.
 1) Position the engine with the drive washer
(110mm) forward of the firewall as shown.
Trim and cut.
Switch.
Throttle servo.
Elevator servo.
Rudder servo.
THROTTLE SERVO ARM INSTALLATION.
Install adjustable servo connector in the servo
arm as same as picture below:
Adjustable Servo
connector.
Servo arm.
Loctite secure.
Nut.
Elevator servo arm.
Throttle servo arm.
Rudder servo arm.
INSTALLING THE SWITCH.
3/ 32” Hole.
Install the switch into the precut hole in the
side, in the fuselage.