User Manual

13
WWW.SEAGULLMODELS.COM
Control Horn.
Mounting Screws.
Mounting Plate.
3) Using a 2mm drill bit and the control
horns as a guide, drill the mounting holes
through the elevator halves.
4) Mount the control horns then into the
mounting backplates. Do not overtighten the
screws or the backplates may crush the wood.
5) Position the rudder control horn on the
le side of the airplane.
6) Install the rudder control horn using the
same method as with the elevator control
horns.
Elevator control horn.
Rudder control horn.
2x12mm.
ELEVATOR PUSHROD
INSTALLATION.
Elevator pushrod
Control horn
Rudder pushrod
Control horn
62mm.
58.2 mm.
RUDDER PUSHROD INSTALLATION.
2x12mm.