User Manual

15
WWW.SEAGULLMODELS.COM
15
With the wing attached to the fuse-
lage, all parts of the model installed
( ready to y), and empty fuel tanks,
hold the model at the marked bal-
ance point with the stabilizer level.
Li the model. If the tail drops when you
li, the model is “tail heavy” and you
must add weight* to the nose. If the nose
drops, it is “nose heavy” and you must
add weight* to the tail to balance.
*If possible, rst attempt to balance the
model by changing the position of the re-
ceiver battery and receiver. If you are un-
able to obtain good balance by doing so,
then it will be necessary to add weight to
the nose or tail to achieve the
proper balance point.
72 MM
CONTROL THROWS.
Ailerons :
- Up : 10 mm
- Down : 10 mm
Elevator :
- Up : 10 mm
- Down : 10 mm
Rudder :
- Right : 15 mm
- Le : 15 mm