User Manual

CESSNA 337 SKYMASTER Instruction Manual.
12
2) Use a pin drill and 2mm drill bit to drill a
small indentation in the mount for the engine
mounting screw.
105mm.
MOUNTING THE ENGINE BEFORE.
 1) Position the engine with the drive washer
(110mm) forward of the firewall as shown.
Trim and cut.
Switch.
rudder servo arm.
Rudder servo arm.
Elevator servo arm.
INSTALLING THE SWITCH.
3/ 32” Hole.
Install the switch into the precut hole in the
side, in the fuselage.
Throttle servo arm.
Landing gear servo arm.