User Manual

3
www.seagullmodels.com
ADDITIONAL ITEMS REQUIRED.
 0.75- 0.91 2-stroke.
0.91 - 1.10 4-stroke.
 Computer radio with 8 servos.
 Glow plug to suit engine.
 Propeller to suit engine.
 Protective foam rubber for radio
system.
TOOLS & SUPPLIES NEEDED.
 Thick cyanoacrylate glue.
 30 minute epoxy.
 5 minute epoxy.
 Hand or electric drill.
 Assorted drill bits.
 Modelling knife.
 Straight edge ruler.
 2mm ball driver.
 Phillips head screwdriver.
 220 grit sandpaper.
 90° square or builder’s triangle.
 Wire cutters.
 Masking tape & T-pins.
 Thread-lock.
 Paper towels.
1 Fuselage
2 Left wing panel
3 Right wing panel
4 LED lights
5 Tail set
6 Wheel pants(2)
7 Seat(2)
8 landing gear
9 Tail wheel
10 Struts
11 Cowling
12 Fuel tank
13 canopy
14 Wheels and spinner
15 Aluminum wing tube
16 Pilots
17 Hardware bag included
18 Ep conversion pack
19 Engine mount
KIT CONTENTS.TS
INSTALL THE AILERONS CONTROL
HORN.
Epoxy
Fiberglass control horn.
Aileron control horn.
Epoxy
Install the flap control horn using the same
method as same as the aileron control horns.
INSTALL FLAP CONTROL HORN.
Fiberglass control horn.