User Manual

ManualsBrandsSeagull Models ManualsAircraftsChristen Husky (Blue Red White)

11

www.seagullmodels.com

INSTALLING THE SWITCH.

3/ 32” Hole.

Install the switch into the precut hole in the

side, in the fuselage.

Cut Covering.

Recomend mounting switch inside fuselage if

using floats.

Throttle servo.

THROTTLE SERVO ARM INSTALLATION.

Install adjustable servo connector in the servo

arm as same as picture below:

Adjustable Servo

connector.

Servo arm.

Loctite secure.

1 PCS.

Throttle servo arm.

3x10 mm

MOUNTING THE ENGINE.

 1) Position the engine with the drive washer

(145mm) forward of the firewall as shown.

Switch Installation.