User Manual

11
Nylon M4x25mm.
5.
6.
Fuel pick up tube.
Fuel ll tube.
Vent tube.
7.
8.
ENGINE MOUNT INSTALLATION.
1) Locate the items necessary to install
the engine mount included with your
model.
8) Connect the lines from the tank to
the engine and muer. e vent line will
connect to the muer and the line from
the clunk tothe carburetor.
Blow through one of the lines to ensure
the fuel lines have not become kinked inside
the fuel tank compartment. Air should ow
through easily.
1.
2) Use four 4x30mm head bolts and four
4mm washers to attach the engine mount
rails to the ewall. Tighten the screws
. Make sure to use threadlock on the
screws to help prevent them from vibrat-
ing loose.
2.
Balsa wood.
read locker glue.