User Manual

NIEUPORT 28 REPLICA
Instruction Manual.
20
Fiberglass control horn.
Rudder Fiberglass control horn.
1.
2.
3.
1.
INSTALLING VERTICAL FIN.
1) While holding the vertical stabilizer
rmly in place, use a pen and draw a
line on each side of the vertical stabilizer
where it meets the top of the fuselage.
2) Using a modeling knife, remove the
covering from over the precut hinge slot
cut into the lower rear portion of the fu-
selage.
Epoxy.
2.
3.
4.