User Manual

31
INSTALLATION PILOT AND
WINDSHIELD.
1) Locate items necessary to install pilot
and windshield.
2) A scale pilot is included with this ARF.
e Pilot included ts well in the cockpit.
(or you can order others scale pilot ures
made by SG Models. ey are available at
SG Models distributors.)..
If you are going to install a pilot gure,
please use a sanding bar to sand the base
of the gure so that it is t.
29.
1.
Epoxy.
2.
3.
3) Position the pilot gure on the cock-
pit oor as shown. Use epoxy to glue the
base of the pilot gure, please see pictures
as shown.
3) Position the pilot gure on the cock-
pit oor as shown. Use epoxy to glue the
base of the pilot gure, please see pictures
as shown.
4) Position the windshield onto the fuse-
lage. Trace around the windshield onto
the fuselage using a felt-tipped pen. Cut
and remove the covering from between
the lines drawn, and glue the windshield
to the fuselage using epoxy or a special
canopy glue.
4.