User Manual

5
Ailerons control horn
Epoxy.
3.
INSTALLING THE AILERON SERVOS.
1.
Because the size of servos dier, you
may need to adjust the size of the precut
opening in the mount. e notch in the
sides of the mount allow the servo lead to
pass through.
1) Using a small weight (Weighted fuel
pick-up works well) and string, feed the
string through the wing as indicated.
2.
2) Use dental oss or heatshrunk tube to
secure the connection so they cannot be-
come unplugged.
3) A string has been provided in the wing
to pull the aileron lead through to the
wing root. Remove the string from the
wing at the servo location and use the
tape to attach it to the servo extension
lead. Pull the lead through the wing and
remove the string.
3.
4.
5.
6.
Mininum servo spec.
Torqu e : 80 oz-in (5.8 kg-cm) @ 4.8V;
100 oz-in (7.2 kg-cm) @ 6.0V