User Manual

39
Use Epoxy Glue to glue the Horizontal
Stabilizer to the fuselage.
2.
3.
4.
5.
Install the elevator control horn using the
same method as with the aileron control
horns.
Position the elevator control horn on the
both side of elevator.
ELEVATOR PUSHROD HORN
INSTALLATION
read one clevis and M3 lock nut on
to each elevator control rod. read the
horns on until they are ush with the
ends of the control rods.
Elevator and rudder pushrods assembly
as pictures below.
1.
Elevator control horn.
M3 clevis M3 lock nut.
3.
885mm.
2.