User Manual

GIANT SCALE P-47 RAZORBACK 50-61cc/EP ARF
Instruction Manual.
4
Because the size of servos dier, you
may need to adjust the size of the precut
opening in the mount. e notch in the
sides of the mount allow the servo lead to
pass through.
Place the servo between the mounting
blocks and space it from the hatch. Use
a pencil to mark the mounting hole loca-
tions on the blocks.
Use dental oss or heatshrunk tube to
secure the connection so they cannot be-
come unplugged.
C/A glue.
INSTALLING THE AILERON SERVOS
5.
6.
1.
2.
Use drill bit in a pin vise to drill the mout-
ing holes in the blocks.
Apply 2-3 drops of thin C/A to each of
the mounting holes. Allow the C/A to
cure without using accelerator.
1.5mm.
3.
4.
Mininum servo spec.
Torqu e : 110 oz-in (7.9 kg-cm) @ 4.8V;
131 oz-in (9.4 kg-cm) @ 6.0V
Ailerons servo.
Flap servo.