User Manual

67
2) If all the decals are not precut, please
use scissors or a sharp hobby knife to cut
the decals from the sheet. Please be cer-
tain the model is clean and free from oily
ngerprints and dust. Position decal on
the model where desired, using the pho-
tos on the box and aid in their location.
1) If all the decals are precut and ready
to stick. Please be certain the model is
clean and free from oily ngerprints and
dust. Position decal on the model where
desired, using the photos on the box and
aid in their location.
APPLY THE DECALS
BALANCING
1) It is critical that your airplane be
balanced correctly. Improper balance will
cause your plane to lose control and
crash. THE CENTER OF GRAV-
ITY IS LOCATED 100MM BACK
FROM THE LEADING EDGE OF
THE WING AT THE WING ROOT.
2) Mount the wing to the fuselage. Place a
piece of masking tape on the top of each
wing 100mm back from the leading edge
at the wing root.
2.
3.
4.
ATTACHMENT WING-FUSELAGE
Attach the aluminium tube into fuselage.
1.