Specifications

3
www.seagullmodels.com
ADDITIONAL ITEMS REQUIRED.
 0.75-0.91 2-stroke.
0.91-1.25 4-stroke.
 Computer radio with 5 servos.
 Glow plug to suit engine.
 Propeller to suit engine.
 Protective foam rubber for radio
system.
 Silicone fuel line.
TOOLS & SUPPLIES NEEDED.
 Thick cyanoacrylate glue.
 30 minute epoxy.
 5 minute epoxy.
 Hand or electric drill.
 Assorted drill bits.
 Modelling knife.
 Straight edge ruler.
 2mm ball driver.
 Phillips head screwdriver.
 220 grit sandpaper.
 90° square or builder’s triangle.
 Wire cutters.
 Masking tape & T-pins.
 Thread-lock.
 Paper towels.
KIT CONTENTS.
1 Fuselage
2 Canopy
3 Left wing panel
4 Right wing panel
5 Tail set
6 Aluminum wing tube
7 Scale pilot
8 Fiberglass cowl
9 Main landing gear
10 EP conversion pack
11 Hardware bag included
INSTALLING LED LIGHTING SYSTEM.
HINGING THE FLAP.
Hinge.
T-pin.
C/A glue.
4.8v led lights.