Specifications

31
www.seagullmodels.com
Repeat the procedure for the other wing.
1
3
C/A glue.
M2x6mm.
INSTALLTION PILOT.
2
1
3
Epoxy.
2
APPLY THE DECALS.
1) If all the decals are precut and ready to
stick. Please be certain the model is clean and
free from oily fingerprints and dust. Position
decal on the model where desired, using the
photos on the box and aid in their location.
2) If all the decals are not precut, please use
scissors or a sharp hobby knife to cut the
decals from the sheet. Please be certain the
model is clean and free from oily fingerprints
and dust. Position decal on the model where
desired, using the photos on the box and aid
in their location.
Epoxy.