User Manual

AT-6 TEXAN _ CODE SEA 76. Instruction Manual.
10
M2 lock nut.
Wing.
Aileron.
 2) Using a modeling knife, cut one length
of silicon fuel line. Connect one end of the line
to the weighted fuel pick up and the other end
to the nylon pick up tube.(The silicon tube is
not included).
Repeat the procedure for the other wing
half.
 1) Using a modeling knife, carefully cut
off the rear portion of one of the 3 nylon tubes
leaving 1/2” protruding from the rear of the
stopper. This will be the fuel pick up tube.
INSTALLING THE STOPPER ASSEMBLY.
3) Carefully bend the second nylon tube up
at a 45º angle. This tube is the vent tube.
Aileron.
Wing.
Wing.
Aileron.
M2 lock nut.
M2 clevis.
110 mm.
75mm.
Aileron.
Wing.
INSTALLATION THE PUSHROD .