User Manual

EXTRA 300S INSTRUCTION MANUAL
5
Use a small weight (Weighted fuel pick-up)
and thread to feed the servo connector
through the wing as shown.
INSTALLING THE AILERON SERVOS.
! 1) Remove servo tray from the each panel
of wing. Install servo and servo arm. See
pictures bellow.
Attach the string to one end of servo lead and
carefully thread it though the wing. Once you
have thread the lead throught the wing, remove
the string and repeat for the other servo lead.
Use masking tape to secure the leads to the
wing and prevent them from falling back into
the wing
Because the size of servos differ, you
may need to adjust the size of the
precut opening in the mount. The notch
in the sides of the mount allow the servo
lead to pass through.
! 2) Install the rubber grommets and brass
collets onto the aileron servo. Test fit the servo
into the aileron servo mount.
Small weight
Thread
Small weight.
Thread.
Servo (2pcs).