User Manual

SEAGULL FUNFLY 3D. Instruction Manual.

INTRODUCTION.

Thank you for choosing the SEAGULL FUNFLY 3D ARTF by SEAGULL MODELS COMPANY LTD.

The SEAGULL FUNFLY 3D was designed with the intermediate/advanced sport flyer in mind. It

is a semi scale airplane which is easy to fly and quick to assemble. The airframe is conventionally

built using balsa, plywood to make it stronger than the average ARTF, yet the design allows the

aeroplane to be kept light. You will find that most of the work has been done for you already. The motor

mount has been fitted and the hinges are pre-installed. Flying the SEAGULL FUNFLY 3D is simply

a joy.

This instruction manual is designed to help you build a great flying aeroplane. Please read this

manual thoroughly before starting assembly of your SEAGULL FUNFLY 3D . Use the parts listing

below to identify all parts.

WARNING.

Please be aware that this aeroplane is not a toy and if it is assembled or used incorrectly it

will cause injury to people or property. WHEN YOU FLY THIS AEROPLANE YOU ASSUME

ALL RISK & RESPONSIBILITY.

If you are inexperienced with basic R/C flight we strongly recommend you contact your R/C supplier

and join your local R/C Model Flying Club. R/C Model Flying Clubs offer a variety of training

procedures designed to help the new pilot on his way to successful R/C flight. They will also be able

to advise on any insurance and safety regulations that may apply.

KIT CONTENTS