User Manual

SEAGULL FUNFLY 3D. Instruction Manual.
6
Thread locker glue.
ENGINE MOUNT INSTALLATION.
1) Locate the items necessary to install the
engine mount included with your model.
2) Use four 4x30mm head bolts and four 4mm
washers to attach the engine mount rails to
the firewall. Tighten the screws . Make sure to
use threadlock on the screws to help prevent
them from vibrating loose.
4x30mm.
INSTALL RUDDER CONTROL HORN.
Repeat steps to install the rudder control
horn as same as steps done for ailerons.
Elevator control horn.
Rudder.
Aluminum Washer.
CONTROL HORN
M3 SCREW.
M3 LOCK NUT.
Epoxy.
Aluminum Washer.
Fuselage.
Fuselage.
18mm.
Epoxy.
Rudder.
Rudder control horn.
18mm.
Epoxy.
Horizontal
Stabilizer.
Elevator.