User Manual

ZERO FIGHTER. INSTRUCTION MANUAL
13
! !
! !
! 3) Attach the Z-Bend in the pushrod wire
to the throttle arm on the carburetor. You will
need to remove the throttle arm from the car-
buretor to be able to attach the Z-bend. When
complete, reattach the throttle arm to the car-
buretor.
PARTS REQUIRED
COWLING
! {1} Molded Fiberglass Cowling
! {4} 3mm x 12mm Wood Screws
Completely tighten the plates metal
Muffler exhaust
Cylinder head
Align the cowling on the fuselage and secure
it with 4 buttom head screws. Do not
overtighten the screw, as this will take away
the vibration.
PROPELLER & SPINNER
Plate metal
Pushrod wire