User Manual

www.seagullmodels.com
19
Wing.
Aileron.
M3 lock nut.
Snap keeper.
Servo arm.
3) Connect the linkage as shown and secure
the control wire with a snap keeper.
8mm
Snap keeper.
M2 lock nut.
Metal clevis.
Repeat the procedure for the other aileron servo.
WING ASSEMBLY.
1.
2.
1.
3.
1) Locate the items necessary to attach the
wing.
2) Slide the aluminum wing tube into one of
the wing panels. Only slide the tube in as far
as it will easily slide. Forcing the tube could
possibly damage the wing.
3) Slide the wings onto the tube and connect
the aileron leads from the wing to the servo
extension leads from the receiver.