User Manual

ZLIN 50. Instruction Manual
20
INSTALLING THE HORIZONTAL STABILIZER.
Center line.
 1) Using a ruler and a pen, locate the
centerline of the horizontal stabilizer, at the trail-
ing edge, and place a mark. Use a triangle
and extend this mark, from back to front,
across the top of the stabilizer. Also extend
this mark down the back of the trailing edge of
the stabilizer.
 2) Using a modeling knife, carefully re-
move the covering at mounting slot of horizon-
tal stabilizer.
C/A glue.
C/A glue.
M3x2.5mm.
2.
Screw.
2.
M3x2.5mm.
5) Attach the wood washers in place with C/A
glue.
6) To install the gun onto the wing. Use a hobby
knife to cut a slot at the leading edge of the
wing as shown and glue it with C/A glue for
the gun.
3.
2.5mm.
4) To help strengthen the wing tube, use
machine screw M3x2.5mm to secure and lock
the wing tube at end of wing tube as position
already marked and predrilled, please see
below pictures.