User Manual

www.seagullmodels.com
7
Rudder control horn.
Thread locker glue.
ENGINE MOUNT INSTALLATION.
M4 x 30mm.
Diameter =5.5mm.
1) Locate the items necessary to install the
engine mount included with your model.
2) Use four 4x30mm head bolts and four 4mm
washers to attach the engine mount rails to
the firewall. Tighten the screws . Make sure to
use threadlock on the screws to help prevent
them from vibrating loose.
+ .75-.91-1.00: 2 stroke.
+ 1.00-1.25: 4 stroke.
o 1.2: 2 stroke-4 stroke.