User Manual

www.seagullmodels.com
9
Fuel tank.
A.
A.
C/A glue.
You should mark which tube is the vent
and which is the fuel pickup when you
attach fuel tubing to the tubes in the stopper.
Once the tank is installed inside the fuselage,
it may be difficult to determine which is which.
 8) Use plywood template to hold in place
the fuel tank with C/A glue to secure the fuel
tank inside the fuselage. To help prevent
moveable from transferring to the fuel tank.
 7) Slide the fuel tank into the fuselage.
Guide the lines from the tank through the hole
in the firewall.
 9) Connect the lines from the tank to the
engine and muffler. The vent line will connect
to the muffler and the line from the clunk to the
carburetor.
WHEEL AND WHEEL PANTS
INSTALLATION.
Fuel pick-up tube.
Fuel fill tube.
Vent tube.
Blow through one of the lines to ensure
the fuel lines have not become kinked in-
side the fuel tank compartment. Air should
flow through easily.
 1) Locate the items neccessary to install
the wheel and wheel pants as shown.
10mm.
4.2mm.
 2) Follow diagram below for wheel pant
installation:
Use a drill and 4.2mm drill bit to drill a hole in
the wheel pants.
Drill a hole.