Manualshelf

Use and Care Manual

ManualsBrandsSeal-All ManualsPaint1 fl. oz. Adhesive and Sealant
123
Technical
Data Sheet
SEAL-ALL
®
CONTACT ADHESIVE / SEALANT
SEAL-ALL
®
CONTACT ADHESIVE/SEALANT | Rev 04 – Effective: 2014October / Approved: 35TMorgan Page | 1
Eclectic Products, Inc.
Manufacturing Facility
101 Dixie Mae Drive
Pineville, Louisiana
eclecticproducts.com
800.349.4667
ISO 9001:2008
Compliant
Quality Management
Systems
Administration Office
Eugene, Oregon
eclecticproducts.com
800.693.4667
2.0 fl oz carded tube
1.0 fl oz carded tube
PRODUCT DESCRIPTION
SEAL-ALL
®
is the all-purpose adhesive used by hobbyists and mechanics alike to seal,
bond, insulate, waterproof and stick to a wide variety of materials. Use it on practically
anything: wood, steel, aluminum and copper; most plastics and rubber; porcelain, glass
and china; vinyl, fiberglass, canvas and leather; cardboard, paper and much more! Fast-
drying and clear, SEAL-ALL
®
can withstand changes in climate, insulating and toughening
with age. Known as “the repair kit in a tube,” it does not require mixing or heating, does
not become brittle in cold weather and resists water, gasoline, oil and most solvents.
WHERE TO USE / APPLICATIONS
• Repair distributor caps, interior panels, radiators, gaskets and more!
• Maintain golf club grips, fletching arrows, fishing rod tips and guides,
tents, canoes and more!
• Repair china, porcelain, fiberglass, figurines, linoleum, furniture, knobs
and drawers, screens, gutters and much more.
FEATURES AND BENEFITS
WEATHERPROOFING – can withstand changes in climate; resists water and other
environmental elements
CHEMICAL RESISTANT – is not affected by oil, gasoline, alcohol and most solvents
ABRASION RESISTANT – maintains bond strength even on objects subject to wear
FAST DRY TIME – creates a strong, secure bond quickly
TECHNICAL INFORMATION
PROPERTIES
UNCURED MATERIAL
Color:
VOC:
Solvent:
Flammable:
Density:
Solids:
Viscosity:
Tack time:
Full cure time:
Storage:
Freeze/thaw stability:
Shelf life:
410 grams/liter
Methyl Ethyl Ketone (MEK) and Acetone
Yes
7.86 lbs/gal
35% by weight, 24.3% by volume
3,000 cps
2 – 3 minutes
Thin film: 2 - 3 hours / Thick film: 3 - 6 hours
Ideal temperature range: 50 to 80 °F (10 and 27 °C). Product may thicken
when stored in colder temperatures but will not freeze. If product
thickens from colder temperatures, warm to room temperature before
use.
Stable, allow product to warm to room temperature before using
CURED MATERIAL
Chemical resistance:
UV resistance:
Hardness:
Tensile strength:
Elongation:
Service temperature:
Paint-over time:
None; paint-over for UV resistance
90 Shore A
7250 lb/in
2
(ASTM D-412)
25% (ASTM D-412)
-40 to 150 °F (-40 to 66 °C)

Summary of content (3 pages)