System Manual

COMMERCIAL SYSTEM MANUAL

Step 1:

Plug hub and charging tower with band into wall outlet with SEAL SwimSafe charging cords. Let both

charge overnight. All bands and the hub lights should be solid green, indicating they are fully charged.

CHARGING TOWER HUB HUB UNDER POWER

CHARGING TOWER UNDER POWER

(power connect underneath charging tower)

Step 2:

Press the power button on the hub. The LCD screen should light up and a welcome message will

appear.

Step 3:

Remove bands from the charging tower. Upon removal bands will flash white, meaning they are

communicating with the hub and ready for use. You will also note that on the top of the hub screen, the

band count will increase indicating how many bands are being monitored by the hub.

Step 4:

All bands are linked to your hub before shipment. However, if a band is removed from the charger and

does not begin flashing white you will need to relink the band. Relink band by placing band in hub

charging port and pressing the link button . Remove band from hub charging port and white light

should begin flashing.

*Linking a band to hub can be done with hub plugged in or unplugged from a wall outlet*

What is linking anyway?