System Manual

*Setting swim level on band can be done with hub plugged in or unplugged from a wall outlet*

More about swim levels, please.

Swim level should be determined by the ability of the swimmer. There are three levels, beginner, standard

and advanced. Beginner/pink light will alarm if swimmer is submerged for 3 seconds, standard/blue light

will alarm if swimmer is submerged for 20 seconds and advanced/light blue will alarm if a swimmer is

submerged for 55 seconds.

Step 6:

Once bands are linked (flashing white light when off hub) and swim level set. Place hub at least 30 inches

off pool deck and at the midpoint of the pool with the hub screen facing the swimmers.

Step 7:

Swimmers may put on the band by clasping it together at the back of their neck (some may need help

from an adult) and begin their swim. If a swimmers band is too tight around neck add black extender to

band.

Step 8:

At the end of use place swim bands on charging tower, power down hub and charge hub with USB cord.

Step 9:

Before using the system, practice, practice, practice. Please refer to our training and troubleshooting

videos online at www.sealswimsafe.com to learn more.

REMEMBER:

3. Critical to safe swimming practices are early and effective swim lessons, vigilant life guarding and

parents, and a safe swimming environment. Master your system and add the SwimSafe

technology as another layer of defense to keep your swimmers safe.

4. Extended breath holding puts swimmers at risk for shallow water blackout and even death, it

should be forbidden. As well as, any sort of horse play to attempt to trigger alerts.