MSDS

ManualsBrandsSeal-Krete ManualsPaint64 oz. Clean N-Etch Etching Solution

MATERIAL SAFETY DATA SHEET

SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION

PRODUCT NAME: Seal - Krete CLEAN - N -

ETCH

PART NUMBER: 411000

GENERAL USE: Cleaning and etching concrete

PRODUCT DESCRIPTION: Yellow liquid, characteristic mild odor

MANUFACTURER'S NAME

Seal-Krete

DATE PREPARED: February 11, 2011

SUPERSEDES: New

Page 1 of 4

ADDRESS (NUMBER, STREET, P.O. BOX)

306 Gandy Road

TELEPHONE NUMBER FOR INFORMATION

(800) 323-7357

(CITY, STATE AND ZIP CODE) COUNTRY

Auburndale, FL 33823-2723 USA

EMERGENCY TELEPHONE NUMBER

Chemtrec (800) 424-9300 Outside USA (703) 527-3887

SECTION 2 - HAZARDS IDENTIFICATION

EMERGENCY OVERVIEW

Acidic liquid, prolonged contact may cause skin & eye irritation. Ingestion may cause gastric distress. Hazard Symbols for this product - Xi,

Phrases - R36/37/38

POTENTIAL HEALTH EFFECTS

INHALATION: Breathing concentrated vapors may cause irritation of respiratory tract.

SKIN: Prolonged contact may cause irritation.

EYES: Contact with eyes will cause severe irritation and may cause chemical burns.

INGESTION: Ingestion of small quantities may cause gastric distress, vomiting and diarrhea. Ingestion of large quantities may be extremely

harmful or fatal.

CARCINOGENICITY NTP? No IARC MONOGRAPHS? No OSHA REGULATED? No

SECTION 3 -

COMPOSITION

INFORMATION

ON INGREDIENTS

HAZARDOUS COMPONENTS

CAS #

EINECS #

(by

weight)

OSHA PEL

ACGIH TWA

LBS

PPM

MG/M3

PPM

MG/M3

Urea monohydrochloride 506-89-8 208-059-6 30 - 60 not established

The remaining components of this product are non-hazardous or are in small enough quantities as to not meet regulatory thresholds for

disclosure. These components contain no substances or impurities which would influence the classification of this product.

Summary of content (4 pages)

PAGE 1
MATERIAL SAFETY DATA SHEET SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION PRODUCT NAME: Seal - Krete CLEAN - N - ETCH PART NUMBER: 411000 GENERAL USE: Cleaning and etching concrete PRODUCT DESCRIPTION: Yellow liquid, characteristic mild odor MANUFACTURER'S NAME Seal-Krete ADDRESS (NUMBER, STREET, P.O.
PAGE 2
MATERIAL SAFETY DATA SHEET PRODUCT NAME: Seal - Krete CLEAN - N - ETCH February 11, 2009 Page 2 of 4 SECTION 4 - FIRST AID MEASURES INHALATION: Remove affected person to fresh air; wash mouth and nasal passages with water repeatedly; if breathing difficulties persist seek medical attention. SKIN: Wash contacted area with soap and water; DO NOT attempt to neutralize with chemical agents; if irritation persists, seek medical attention. EYES: Check for and remove contact lenses.
PAGE 3
MATERIAL SAFETY DATA SHEET PRODUCT NAME: Seal - Krete CLEAN - N - ETCH February 11, 2009 Page 3 of 4 SECTION 9 - PHYSICAL AND CHEMICAL PROPERTIES APPEARANCE AND ODOR Yellow liquid, characteristic mild odor SPECIFIC GRAVITY (WATER = 1) 1.067 SOLUBILITY IN WATER Complete pH 0.
PAGE 4
MATERIAL SAFETY DATA SHEET PRODUCT NAME: Seal - Krete CLEAN - N - ETCH February 11, 2009 Page 4 of 4 SECTION 15 - REGULATORY INFORMATION TSCA (Toxic Substance Control Act) All components of this product are listed on the U.S. Toxic Substances Control Act Chemical Inventory (TSCA Inventory) or are exempted from listing because a Low Volume Exemption has been granted in accordance with 40 CFR 723.50.