User manual

Specifications 15
English
3 SPECIFICATIONS
3.1 Identification
The machine identification label (example in Figure 5) is located at the bottom of the right-
hand cabinet, on the rear side of the machine.
This label indicates the model (version) and the power supply requirements.
CAUTION:
The mains supply must match the values indicated on the machine
identification label.
Figure 5: Machine identification label (example).
3.2 Machine dimensions
3.2.1 Uncrated Metric American
Width 267 cm 105 in.
Height 165 cm 65 in.
Depth (excl. in-feed table) 59 cm 23.2 in.
Maximum depth 108 cm 42.5 in.
Working height 90 cm 35.4 in.
Weight 780 kg 1719 lbs
3.2.2 Crated
Width 275 cm 108.3 in.
Height 180 cm 71 in.
Depth 90 cm 35 in.
Weight 840 kg 1851 lbs
3.2.3 Working area
Width 390 cm 154 in.
Depth 190 cm (75 in.) + 2x maximum board length
Note:
Anti-static clothing and footwear of the operator and an anti-static floor coating will help
reduce the build-up of electrostatic charges (ESD).
A relative humidity of at least 70% also helps reducing ESD-build-up.