User manual

6 User Manual 80Pro
5 Operating 21
5.1 Process controls 21
5.1.1 Control panel 21
5.1.2 Heater control 23
5.1.3 Additional controls 24
5.1.4 Error indications 28
5.2 Operating modes 29
5.2.1 Normal forward mode 29
5.2.2 Reverse mode 29
5.2.3 Slow mode 30
5.3 Placing film rolls 31
5.3.1 Auto-grip shafts 31
5.3.2 Use of films with release liner 31
5.3.3 Loading shaft with film rolls 32
5.3.4 Presetting the tension 33
5.3.5 Pressure setting 33
5.4 Webbing 34
5.4.1 Upper section only 34
5.4.2 Upper and lower section 36
5.4.3 Roll to roll 38
5.4.4 Pull rollers 39
5.4.5 Unloading 39
5.5 Processes 40
5.5.1 Mounting images or decals 40
5.5.2 Pre-coating panels 41
5.5.3 Single-sided lamination 42
5.5.4 Over-lamination 42
5.5.5 Double-sided lamination 42
5.5.6 Encapsulation 43
5.5.7 Decaling 43
5.6 Settings 43
6 Maintenance 44
6.1 Cleaning 44
6.1.1 Cleaning the silicone covered rollers 44
6.2 Preventive maintenance 45
6.2.1 Auto-grip shafts 45
6.3 Trouble shooting 45
6.4 Technical assistance 47
7 Glossary 48