Owner`s manual

Safety Information
4
Intended Use
The AquaSEAL™ SW-4000 liquid laminator is intended for use with medium, large, and
grand format graphic output Graphics can vary in widths from 0.3–3.3M (1–10 ft.) in
width and can be up to 90M (295 ft.) in length (dependent on thickness of media used).
The AquaSEAL™ SW-4000 liquid laminator is intended for use with AquaSEAL™ water
based sealant only. Use of solvent-based or other manufacturers’ sealants may
damage the machine and may void any warranty.
Safety Instructions
Caution
When handling any chemical products, read the manufacturers’ container labels and the
Material Safety Data Sheets (MSDS) for important health, safety, and environmental
information.
To obtain MSDS Sheets for AquaSEAL™ Products, Please call your local distributor.
In case of emergency, please telephone: [phone] Europe, or
[phone] USA
When using any equipment, always follow the manufacturers’ instructions for safe
operation.
Warning
Avoid contact with heat source during use. Wear heat resistant gloves and safety
glasses. Failure to avoid contact with hot surfaces may cause burns. Always observe
manufacturers’ recommendations when handling chemicals.