Owner`s manual

Section 1. Introduction
6
The AquaSEAL™ SW-4000 is a medium, large, and grand format media liquid laminator
used to coat graphics with a protective sealant. Operating either roll or fan fed, the
media is threaded through the applicator mechanism, under the drying assembly, and
onto the take-up roller. During operation, the liquid laminator applies sealant onto the
printed graphics and then cures and dries it before winding the media onto the take-up
roller.
Hardware Overview
Figure 1-1 shows the front view of the liquid laminator. Major components (safety items
shown in red) include the following:
Figure 1-1. Front View
Safety
Interlock Switch
Dryer Panel
Meyer Bar
Assembly
Draw Down
Assembly
Web
Idler
Tension
Idler
Emergency
Stop
Control Panel
Applicator
Tube