Troubleshooting guide

LAMINATOR FEATURES

Figure 4. Laminator Features

1. Digital Touch Pad Control Panel with LED indicators

• It allows the operator to use 9 preset heat and motor

speed settings to match film applications. The operator

can also customize these settings.

2. Nip Motor driven roller height adjustment

• Allows for accurate roller nip setting with no need for an

air compressor. Adjusts for the thickness of the material

to be processed. Nip Indicator Lights indicate which nip

setting the rolls are currently set at.

3. Emergency Stop Buttons (2)

• Located on top of each side plate cover which

immediately ceases the laminator’s operation and raises

the top roller.

4. Swing-out Auto-grip Unwind Shafts (2)

• Easy loading and positioning of materials. Suitable for

rolls wound onto a 3-inch ID core.

5. Integral Braking System

• A simple braking system with a Knurled Collar provides

the means of adjusting the brake tension for the films and

images. Fitted on both the autogrip unwind shafts.

6. High release Silicone Coating Covered Rollers

• Prevents adhesive build-up and allows for easier cleaning

7. Automatic Wind-up Idler

• Removable idler for winding up the release liner, finished

images or other laminate material. Located on the top

front of the laminator. Use with 3-inch ID spare cores.

8. Print Guide In-feed Table

• Table with print guide for flat, wrinkle-free feeding of

digital prints. Pivots down to allow for easier webbing.

Feeding images under the print guide, directly into the nip,

prevents the images from lifting up and interupting the

photoelectric eyes.

9. Flashing Warning Light

• When the using the footswitch, if the photo eye is

blocked, this Flashing Light and a BUZZER sounds,

warning of close proximity to the nip.

*** Covered Foot Switch

• Allows for complete user control when initially feeding in

an image.

*** Electric Heating Elements

• Provide for rapid, even heating to 250° F (121°C).