Carpet Shampooer/ Extractor Household Type Owner’s Guide 2500 Series Index Important Safeguards ..................... 2 Service Information ......................... 5 Assembly ........................................ 7 Preparation ..................................... 8 Use ........................................... 11-15 Maintenance ............................ 16-18 Problem Solving ............................ 19 Order Form ................................... 21 Warranty ..............................
IMPORTANT SAFEGUARDS When using an electrical appliance, basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS CARPET SHAMPOOER/EXTRACTOR. WARNING To reduce the risk of fire, electric shock, or injury. • Do not immerse product. Use only on surfaces moistened by cleaning process. • Do not use outdoors or expose to rain. • Use only commercially available floor cleaners intended for machine application.
CONSEILS DE SÉCURITÉ IMPORTANTS L’utilisation d’un appareil électrique sous-entend l’observation de certaines règles de sécurité élémentaires: LIRE TOUTES LES INSTRUCTIONS AVANT D’UTILISER L’ASPIRATEUR. AVERTISSEMENT Pour réduire les risques de feu, de secousse électrique ou de blessure: • Ne pas immerger. Utiliser uniquement sur un tapis mouillé par le dispositif de nettoyage. • Ne pas utiliser à l’extérieur. Ne pas exposer à la pluie.
Grounding Instructions This appliance must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This appliance is equipped with a cord having an equipment-grounding conductor and grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
GENERAL INFORMATION NOTE: Thoroughly clean carpet, upholstery and stairs with a vacuum cleaner before using the Carpet Shampooer/ Extractor. Also, sweep any hard surface floors before using the carpet shampooer/extractor. Automatic Suction Shut-Off The automatic suction shut-off functions when the recovery tank is full of liquid. As the tank fills, the ball float (inside the recovery tank) rises until it seats itself against the motor.
Carpet Shampooer/Extractor Parts* NOTICE Handle Release ON MODELS WITH THE ACCESSORY HOSE, YOU MAY NOTICE SMALL WATER DROPLETS IN THE WATER LINE. THIS IS DUE TO THE FACT THAT ALL UNITS ARE 100% INSPECTED ON THE PRODUCTION LINE USING WATER TO ASSURE PROPER FUNCTION OF THE ACCESSORIES.
I. HOW TO ASSEMBLE* NOTE: Completely assemble the carpet shampooer/extractor before using. A. Attach Handle • Align handle above carpet shampooer/extractor. Hose Hook • Push handle all the way down. • Secure with two screws. Cord Wrap Hook t Hose Tool Caddy Upholstery/ Stair Nozzle Cord Wrap Hook B. Store Attachment Hose Recovery Tank (Available on specific models only) • Wrap the hose around the hose hooks. • Push Upholstery/Stair Nozzle into caddy. C.
II. PREPARING THE CARPET BEFORE CLEANING Vacuum Carpet NOTE: Never use this carpet shampooer/ extractor as a standard vacuum cleaner. For best results, vacuum carpets with a vacuum cleaner that has a brush roll. The bristles of the brush roll help loosen and remove soil that is deep in the carpet nap. (1.) Pretest for Color Fastness Before cleaning the carpet, we recommend testing the carpet for color fastness. Moisten a white towel with the cleaning solution.
III. HOW TO PREPARE THE CARPET SHAMPOOER/EXTRACTOR FOR CARPET CLEANING IMPORTANT: For best results, begin with a clean surface by vacuuming surface or item before using the carpet shampooer/extractor. NOTE: Familiarize yourself with the parts of the carpet shampooer/extractor by reading this owner’s manual before using. NOTE: Mix cleaning solution properly to avoid damage to carpet and upholstery. A. Fill the Clean Water Solution Tank 1) Lift up the tank latch to release the clean water solution tank.
B. Emptying the Recovery Tank NOTE: Turn off the power switch and unplug the carpet shampooer/extractor to empty the recovery tank. FIGURE 1 1) Press the recovery tank latch downward to release the tank from the carpet shampooer/extractor unit as shown in Figure 1. 2) Slide the recovery tank out from the lower portion of the carpet shampooer/ extractor unit. 3) Lift off the recovery tank lid and empty contents into a suitable water drain. 4) Rinse out the recovery tank and tank lid thoroughly.
IV. HOW TO USE THE CARPET SHAMPOOER/EXTRACTOR Carpet Cleaning Solution Release Trigger A. Make sure the selector knob is in the carpet position. B. Place electrical cord into an outlet. Clean Water Solution Tank Handle Release Selector Knob (Available on specific models only.) C. Step on the handle release. Lower handle to operating position.
V. OPERATING THE CARPET SHAMPOOER/EXTRACTOR D. Push power switch on, which is located on the back side of the unit. Power Switch 0 = Off I = On ( ) E. Pull up and hold the solution release trigger and apply two spraying strokes by moving the carpet shampooer/extractor forward and then backward at a moderate pace two times. As the nozzle moves over the carpet, the cleaning solution is sprayed onto the carpet. At the same time the nozzle picks up the dirty water and places it in the recovery tank.
Fabric Code Ratings: • W for wet clean. • S-W for solvent-dry or wet clean. • S for solvent-dry clean only. Do not wet clean. VI. HOW TO PREPARE THE CARPET SHAMPOOER/EXTRACTOR FOR UPHOLSTERY AND STAIR CLEANING (only for models with an attachment hose and upholstery/stair cleaning nozzle) Check the stuffing material if possible Look inside the cushions or on the underneath side. If filling is a dark color, it may bleed through and discolor the fabric.
VII. HOW TO USE THE CARPET SHAMPOOER/EXTRACTOR FOR UPHOLSTERY OR STAIR CLEANING (only for models with an Attachment Hose and Upholstery/Stair Cleaning Nozzle) NOTE: Use extra caution when cleaning on stairs. To prevent the carpet shampooer/extractor from falling, do not place the unit on stairs. It is suggested that the carpet shampooer/extractor be placed at floor level to clean the lower portion of the stairs and be securely placed at the top of the stairway to clean the upper portion of the stairs. A.
How to Use the Carpet Shampooer/Extractor for Upholstery and Stair Cleaning (Continued) C. Place the Upholstery Nozzle at the top of the cleaning area. D. Pull up and hold the solution release trigger and pull the nozzle backward at a moderate pace. E. Release the trigger at the end of the stroke. F. Lift nozzle and start again at the top. Apply one to three spraying strokes. Avoid over-soaking the area. NOTE: As the nozzle moves over the surface, the cleaning solution sprays onto the surface.
VIII. HOW TO MAINTAIN THE CARPET SHAMPOOER/EXTRACTOR The instructions in this booklet serve as a guide to routine maintenance. Follow these suggestions to avoid unnecessary service calls. Before storing the carpet shampooer/extractor, on a linoleum or vinyl surface put the unit in the floor mode and use clean water (without solution) to flush out all remaining particles in the carpet shampooer/extractor unit. • Place clean water in the clean water solution tank.
HOW TO MAINTAIN NOTE: Turn off the power switch and unplug the electrical cord to service cleaning nozzles. C. Cleaning the Carpet Shampooer/Extractor’s Suction Cover Tabs 1. Remove the screws from each side of the suction cover. 2. Lift the suction cover off and clean the area of dirt and lint. 3. Replace the suction cover by sliding the tabs on top of the suction cover into the top slots on the hood. Make sure the suction cover gasket is in place on the unit before replacing cover. 4.
HOW TO MAINTAIN (only for models that feature a brush roll) E. How to Replace the Carpet Shampooer/ Extractor’s Belt NOTE: Turn off the power switch and unplug the electrical cord to replace the brush roll belt. NOTE: If the tanks contain liquid, remove both tanks before placing the handle on the floor. FIGURE 1 FIGURE 2 1. Tip the carpet shampooer/extractor back to place the handle on the floor (See Figure 1). 2.
PROBLEM SOLVING NOTE: Turn off the switch and unplug the electrical cord before servicing. PROBLEM CAUSE 3 Electric Plug M SOLUTION M 3 Power switch is not turned ON M M M M Cleaning solution and water are not released from the Carpet Nozzle M 3 Clean Water Solution Tank is M Be sure Clean Water Solution Tank is locked securely into 3 Carpet nozzle area clogged M M Refill Clean Water Solution Tank with clean water and solution. M Remove debris from the carpet nozzle area.
VACUUM CLEANERS S O L D T O 3/00 The Eureka Company P.O. Box 2799 Bloomington, IL 61702-2799 ORDER FORM (Not applicable in Canada) Name Name Address (street address needed for UPS) City Telephone (Day) State Zip (Eve) (Fax) S H I P Address (street address needed for UPS) T O Telephone City (Day) IMPORTANT: Be sure to include your model, type, and serial numbers. These numbers may be found on the rating plate. State Zip (Eve) (Fax) Part No. Qty.
THE EUREKA LIMITED WARRANTY What This Warranty Covers Your Eureka cleaner is warranted to be free from all defects in material and workmanship in normal household use for a period of one year. The warranty is granted only to the original purchaser and members of his or her immediate household. The warranty is subject to the following provisions.
Questions? Do Not Return To Store Call 1-800-282-2886 7 a.m. to 8 p.m., Central Standard Time, Monday thru Saturday Accessory Items in This Carton 1 hardware package (2 screws) Cleaning Solution 1 carpet shampooer/ extractor handle Thank you for selecting a Eureka Carpet Shampooer/Extractor. Part No. 70326 (5/00) ©1999 White Consolidated Industries, Inc. Printed in U.S.A.