TANKWATCH 4 ® LEVEL MONITOR SYSTEM OWNER’S MANUAL Dometic Corporation • Sanitation Systems 13128 State Rt 226, PO Box 38 Big Prairie, OH 44611 SeaLand Product Customer Service: 1-800-321-9886 (8:00 a.m. - 5:00 p.m.
TABLE OF CONTENTS Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . 2 Product Features . . . . . . . . . . . . . . . . . . . . . . . . 2 Models and Accessories . . . . . . . . . . . . . . . . . . . 2 Dimensional Specifications . . . . . . . . . . . . . . . . . 3 Product Specifications . . . . . . . . . . . . . . . . . . . . . 3 Installation Instructions . . . . . . . . . . . . . . . . . 4 - 5 Wiring Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . 6 Parts List . . . . . . . . . .
PRODUCT SPECIFICATIONS TankWatch® 4 Level Monitor System Product Name: Electrical: 12 Volts DC @ .017 amps (without optional relay) and .152 amps (with optional relay) 24 Volts DC @ .014 amps (without optional relay) and .072 amps (with optional relay) Float Switch Rating = 20 watts with resistive load 12-pin terminal block allows up to one 12-gauge wire per position Maximum Tank Pressure: 25 PSI Materials: Float . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INSTALLATION INSTRUCTIONS ADJUSTABLE LEVEL INDICATOR CAP 1. The adjustable level indicator cap is designed for a 3-inch FPT opening. Order P/N 230272 if tank is made of rigid material and not a SeaLand holding tank. 2. Loosen the compression nuts on the adjustable stem bosses and install the cap into the tank. Slide the #1 stem (see dimensional specifications on previous page) down until the float touches the bottom of the tank.
INSTALLATION INSTRUCTIONS (con’t.) 9. Insert the correct color lens in the appropriate hole from the front side of the face plate, snapping the matching light into the lens firmly. Repeat with the three (3) remaining lens and lights. 10. Insert the (2) small tabs on the left side of the face plate into the housing and snap the large center tab on the right of the face plate into the housing to secure it. OPTIONAL UNIVERSAL FLANGE 1. 2. 3. 4. 5. 6. 7. 8. 9. Find and mark the top center of the tank.
WIRING DIAGRAMS TANKWATCH 4 TANK LEVEL MONITOR SYSTEM RECOMMENDED WIRING FOR WATER TANKS. USE 18GA. STRANDED COPPER WIRE OR LARGER. TANKWATCH 4 TANK LEVEL MONITOR SYSTEM RECOMMENDED WIRING FOR WASTE WATER AND GRAY WATER TANKS. USE 18GA. STRANDED COPPER WIRE OR LARGER. PLEASE NOTE THAT THE RECESSED SHOULDER OF THE FLOAT IS DOWNWARD ON THE EMPTY FLOAT. PLEASE NOTE THAT THE RECESSED SHOULDER OF THE FLOAT IS DOWNWARD ON THE EMPTY AND 1/4 MID FLOAT.
PARTS LIST TankWatch 4 Probe Cap Item 1 2 3 4 5 6 6 7 8 9 10 11 12 Part Number 600342260 385310258 600347587 600340425 600342238 600342114 600342115 600342262 600343657 600340423 600340424 385230268 385230930 Description Wire Cover, Pull Tab Cap Compression Nut/Washer Kit Cap O-Ring Reed Switch Stem (threaded) Polyethylene Tubing Adjustable Level Cap with Vent Adjustable Level Cap without Vent Wire Cover, Pull Tab Cap Reed Switch Stem (barbed) Reed Float Ring Clip Float Stem Kit (incl.
MANUFACTURER’S ONE-YEAR LIMITED WARRANTY Dometic Corporation warrants, to the original purchaser only, that this product, if used for personal, family or household purposes, is free from defects in material and workmanship for a period of one year from the date of purchase. If this Dometic product is placed in commercial or business use, it will be warranted, to the original purchaser only, to be free of defects in material and workmanship for a period of ninety (90) days from the date of purchase.
CONTROL PANEL MOUNTING TEMPLATE 9
