DTD02A EN Tank Discharge Control with Seacock Monitor Instruction manual DE Tankentsorgungssteuerung with Seacock Relay Einbauanleitung . . . . . . . . . . . . . . . . . . . . 13 FR Commande d'évacuation du réservoir with Seacock Relay Mode d'emploi . . . . . . . . . . . . . . . . . . . . . 19 ES Control de descarga del depósito with Seacock Relay Manual de instrucciones . . . . . . . . . . . . .
Dometic Tank Discharge Control 1 6 5 4 3 1 2 2 5 4 2 3 1 3 A B 2 C D
Dometic Tank Discharge Control 4 DTD01A A 1 B C 5 DTD02A A 1 B C 3
Dometic Tank Discharge Control 6 4
Dometic Tank Discharge Control Installation template A 7 C G B D H E F 5
Installation template 6 Dometic Tank Discharge Control
Dometic Tank Discharge Control Notes on using the manual Table of contents 1 2 3 4 5 6 7 8 9 1 EN Notes on using the manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 General safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Intended use . . . . . . . . . . . . . . . .
Intended use Dometic Tank Discharge Control Because attempting to pump-out a holding tank can be harmful if the seacock to the overboard discharge fitting is closed, the DTD02A panel also includes a yellow warning light that indicates when the seacock is closed.
Dometic Tank Discharge Control 4.3 Specifications Dimensions (fig. 3 , page 2) Ref. Dimension Ref. Dimension A 3.25 in. / 83 mm C 51 mm / 2 in. clearance behind wall B 3.25 in. / 83 mm D 0.38 in. / 10 mm 4.4 Approvals ISO 8846; EMC Directive 2004/108/EC; CE approved for electromagnetic compatibility 5 Components Ref 1 (fig.
Installation Dometic Tank Discharge Control 5. Make proper wiring connections to wires extending from bottom of circuit assembly (fig. 2 4, page 2). 6. Remove panel cover (fig. 2 1, page 2) from mounting frame (2) by carefully pulling them apart. Make sure wires between key switch (3) and circuit assembly (4) remain attached. (Key pin 1 – red; pin 2 – brown; pin 7 – blue; pin 8 – red.) 7. Install mounting frame to wall with four fasteners (5). 8.
Dometic Tank Discharge Control 7 Operation Operation Caution! Operator must know local regulations for emptying a holding tank. 7.1 DTD01A discharge control with DTM04 tank monitor system (fig. 4 , page 3) 1. When boat is in unrestricted waters and automatic pump-out is desired, open seacock, insert key into switch and turn to “automatic power” position (A). 2. As holding tank content level increases and raises the “mid” level float, the discharge pump starts (B).
Warranty and Product Liability 8 Dometic Tank Discharge Control Warranty and product liability North America: Manufacturer’s One-Year Limited Warranty Dometic Corporation, Sanitation Division (Dometic) warrants to the original purchaser only that this product, if used for personal, family or household purposes, is free from defects in material and workmanship for a period of one year from the date of purchase.
Dometic Tank Discharge Control Warranty and Product Liability Europe: Warranty and Customer Service Warranty arrangements are in accordance with EC Directive 44/1999/CE and the normal conditions applicable for the country concerned. For warranty or other service, please contact our Dometic Service department listed elsewhere in this manual. Any damage due to improper use is not covered by the warranty.
Notes 14 Dometic Tank Discharge Control
Dometic Tank Discharge Control Notes 15
Dometic Tank Discharge Control Dometic Group is a customer-driven, world-leading provider of leisure products for the RV, automotive, truck and marine markets. We supply the industry and aftermarket with a complete range of air conditioners, refrigerators, awnings, cookers, sanitation systems, lighting, mobile power equipment, comfort and safety solutions, windows, doors and other equipment that make life more comfortable away from home.