Technical Specifications

Premium White Elastomeric Roof Coating - 15 Year Protection
Premium
White Elastomeric Roof Coating
15 Year Protection
Revised: 06/12
Manufacturer:
ThorWorks Industries, Inc.
2520 S. Campbell St.
Sandusky, OH 44870
Phone: [phone]
Fax: [phone]
Description
SealBest Premium Professional Grade White
Elastomeric Roof Coating is a superior performing
product featuring unmatched adhesion, low
temperature flexibility and durability. This product
exceeds the stringent performance specifications
required by ASTM-D6083. Forms a tough, durable
rubber membrane over a variety of roof surfaces.
Uses
EDPM rubber roofs, polyurethane foam, APP and
SBS modified bitumen, asphalt, mobile homes and
RV’s, concrete, wood and more.
Surface Preparation
Clean Roof - Sweep off all dirt, dust, and debris.
Remove rust, mildew, oil, grease, or other foreign
material on the surface. Allow freshly applied
asphalt roofs to cure a minimum of 4 weeks prior
to applying this coating. Scrub roof with SealBest
Concentrated Roof Cleaner or bleach solution
(1 part chlorine bleach and 3 parts water). Rinse
thoroughly and allow to dry.
Application
EPDM ROOFS: When coating EPDM roofs it is
extremely important to remove all dust, dirt,
and embedded clay to assure proper adhesion.
Thoroughly scrub roof surface with SealBest
Concentrated Roof Cleaner or bleach solution
(1 part chlorine bleach and 3 parts water) and
pressure wash entire roof surface. Use a wide
tip on pressure washer to prevent tearing roof
material. Allow surface to dry.
Applying Roof Coating - Stir pail thoroughly. Do
not dilute. For best results apply White Elastomeric
Roof Coating with a soft brush, 3/4” nap paint
roller, or high pressure sprayer. For optimum
performance, durability and warranty purposes,
apply a second coat.
NOTE: This product is not recommended for
gravel, dead level (flat), or shingled roof surfaces.
Clean Up
Wash tools with water before material dries.
Weather Conditions
• Applicationtemperaturemustbeaminimumof
60 °F and rising. Do not apply when temperature
is expected to drop below 60 °F within a 24 hour
period.
• Inareaswheredeworfogaccumulatesinthe
early evening, it is best to coat in the morning.
Stop coating by early afternoon (3:00 pm) to
prevent wash off, which will occur if dew, fog, or
rain arrives before coating dries.
• Donotapplyifrainisimminentorforecastwithin
24 hours of application.
Coverage (Approximate)
One 4.75-gallon pail will coat approximately
250-350 square feet of roof surface.
Precautions
• DoNotHeatorThin
• DoNotFreeze
• DoNotStoreatTemperaturesBelow50ºF
Safety & Environmental Precautions
• RefertoMaterialSafetyDataSheetBeforeUsing
• ForExteriorApplicationOnly
• CloseContainerwhenNotinUse
• EnvironmentalInformationisontheMaterial
Safety Data Sheet
• DoNotReuseEmptyContainer
• VolatileOrganicContent(VOC)is100gm/liter
max
• KEEPOUTOFREACHOFCHILDREN
Ingredients: Cas No.
Water 7732-18-5
100% Acrylic Emulsion Polymer Proprietary
Limestone 16389-88-1
Titanium Dioxide 13463-67-7
Ester Alcohol 25265-77-4
www.homedriveway.com