User Manual

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND

CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY

CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE

USE.

INSTRUCTIONS FOR:

Front Wheel Bearing GEN2

Removal/Installation Kits

Model No's: VS7027, VS7028, VS7029, VS7030

VS7027, VS7028, VS7029, VS7030 Issue No.1 - 02/08/12

Original Language Version

1. CONTENTS

fig.1

Part Numbers

Item Description Qty VS7027 VS7028 VS7029 VS7030

1 Force Screw 1 VS7027.01 VS7028.01 VS7029.01 VS7030.01

2 Thrust Plate 1 VS7027.02 VS7028.02 VS7029.02 VS7030.02

3 Bearing Plate (Silver) 1 VS7027.03 VS7028.03 VS7029.03 VS7030.03

4 Bearing Plate (Black) 1 VS7027.04 VS7028.04 VS7029.04 VS7030.04

5 Sleeved Nut 1 VS7027.05 VS7028.05 VS7029.05 VS7030.05

6 Hub Guide Pins 5 VS7027.06 VS7028.06 VS7029.06 VS7030.06

7 Hub Clamp Screws 2 VS7027.07 VS7028.07 VS7029.07 VS7030.07

8 Hub Clamp (Black) 1pr VS7027.08 (62mm) VS7028.08 (66mm) VS7029.08 (72mm) VS7030.08 (78mm)

9 Hub Clamp (Silver) 1pr VS7027.09 (62mm) VS7028.09 (66mm) VS7029.09 (72mm) VS7030.09 (78mm)

2. APPLICATIONS

VS7027 VS7028 VS7029 VS7030

Audi Skoda Audi Ford

A2 1.2TDi PD (01-05) Fabia (00-12) A1 (2010 - on) C-Max (07-11)

A2 (00-05) Focus ll (04-11)

VW VW Focus C-Max (03-07)

Lupo 3L 1.2TDi PD (01-06) Fox (05-10) Seat

Polo (02-09) Cordoba (03-09) Mazda

Ibiza (02-12) 3 (03-05)

Skoda Volvo

Fabia (00-12) C30 (06-10)

Roomster (06-12) C70 (05-10)

S40 (04-12)

VW V50 (04-10)

Fox (05-10)

Polo (02-12)

PAGE 1
INSTRUCTIONS FOR: Front Wheel Bearing GEN2 Removal/Installation Kits VS7027, VS7028, VS7029, VS7030 Model No's: Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS.
PAGE 2
3. SAFETY INSTRUCTIONS 3.1 General Safety  WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this tool.  WARNING! Familiarise yourself with the specific applications and limitations of the kit, as well as any potential hazards.  Ensure that the kit is correct for the task.  Wear the appropriate personal protective equipment for the task. A full range is available from your Sealey dealer.
PAGE 3
5.1.7 Screw the sleeved nut (5) over the force screw (1) so that it sits against the bearing plate (4). 5.1.8 Use a socket on the force screw (1) and a spanner on the sleeved nut (5) (fig.3). Draw the bearing from the hub carrier. 5.2  5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 5.2.9 Bearing Installation (fig.4 & fig.5) WARNING! DO NOT fit a bearing with a damaged retaining ring.