Instructions

4.1.5. Engage the pawl from the neutral position, and begin ratcheting the chain to the desired tension required.
4.1.6. Wrap any excess binding chain around the ratchet load binder and secure with a cable tie or small gauge wire (not supplied).
4.2. REMOVING THE BINDER
4.2.1. Unwrap the excess chain from around the ratchet load binder.
4.2.2. Switch the pawl to the opposite setting and start ratcheting the ratchet load binder until the chain becomes slack enough to remove
the ratchet load binder.
5. MAINTENANCE
5.1. Clean the binder after each use and wipe with a soft, dry cloth. Store in a safe, dry, childproof location.
5.2. Lubricate the threads regularly with a suitable grease (not supplied).
LB001, LB002 Issue 2 05/07/21
Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.