User Manual

ManualsBrandsSealey ManualsToolsSA27

page 1

INSTRUCTIONS FOR:

STATIC MOUNTED CRANES

450KG & 900KG

MODEL Nos:

SSC450 & SSC900

1. CONTENTS

2. GENERAL

Section 2. General. .................................. 1

Section 2.1 Identification................................ 1

Section 2.2. Technical Data. ............................. 1

Section 3. Safety .................................... 2

Section 4. Assembly .................................. 2

Section 5. Operating Instructions ........................ 3

Section 6. Maintenance/Inspection/Examination ............ 4

Section 7. Owner's & Operator's Responsibilities............ 4

Section 8. Declaration of Conformity ...................5&6

Section 9. Parts List and Diagram .....................7&8

Page No.

2.1. Identification

Supplier: Sealey Power Products,

Kempson Way,

Suffolk Business Park,

Bury St Edmunds,

Suffolk, IP32 7AR.

Model No: SSC450,SSC900

Crane

Illustrated:

SSC900

2.2. Technical Data

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT

CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL

INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.

Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these

instructions, and properly maintained, give you years of trouble free performance.

Model no: .............................SSC450

Lifting Capacity in Position 1:................ 450kg

Lifting Capacity in Position 2:................ 125kg

Weight:.................................. 45kg

Model No: .............................SSC900

Lifting Capacity in Position 1:................ 900kg

Lifting Capacity in Position 2:................ 250kg

Weight:.................................. 50kg

Refer to

instruction

manual

Wear

safety

footwear

Wear

protective

gloves

Manufactured from heavy-duty steel with a powder coated nish for added corrosion resistance. These cranes feature a unique 360° swivel

base for easy manoeuvrability of the load. Threaded locking arm allows the crane to be locked in place when not in use. Mounts easily onto

any strong and stable surface including loading bays, 4x4s and atbed trucks/vans. Robust lifting ram enables a maximum capacity of 450kg

or 900kg when the lifting boom is retracted and 125kg or 250kg when fully extended. Includes heavy-duty chain and hook.

Hook features safety clip to help prevent load sling from slipping.

3. SAFETY

3.1. SAFETY

3 Keep crane, lifting slings, support and beams in good working order and condition. Follow the inspection requirements as

described in Section 6, Maintenance. Take immediate action to repair or replace damaged parts by contacting your supplier.

Ensure that all accessory lifting devices are suitable. If crane is damaged, remove from service immediately.

3 Ensure that the crane is securely fixed to the surface or vehicle on which it is to be mounted.

3 Keep children and unauthorised persons away from the working area.

3 Keep working area clean and tidy, free from unrelated materials and ensure that there is adequate lighting.

3 Ensure that load does not exceed the maximum lifting capacity of the crane. Overloading the crane is dangerous. Where

appropriate, use only the lifting points recommended by the manufacturer of the item to be lifted, e.g. vehicle engine.

3 Before lifting the load ensure that the crane boom is in the lowest practical position, that there are no obstacles which may snag

the load whilst it is being lifted and that the area above the boom is clear.

3 To avoid injury, be fully aware of your own and other persons locations in relation to the lifting, and lowering, of the load.

Original Language Version

SSC450,SSC900 Issue 2 - 18/12/14

Summary of content (8 pages)

PAGE 1
INSTRUCTIONS FOR: STATIC MOUNTED CRANES 450KG & 900KG MODEL Nos: SSC450 & SSC900 Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
PAGE 2
Keep a sound footing and balance, and ensure the floor is not slippery, and wear non-slip footwear. Ensure boom extension locking pin and 'R' pin are in position before lifting. Ensure the centre of gravity always remains inside the crane base. DO NOT harness the load at an angle or use any attachments not verified as fit for purpose. DO NOT allow the load to swing during lifting. DO NOT allow the load to drop suddenly.
PAGE 3
fig.3 fig.4 6. MAINTENANCE / EXAMINATION / INSPECTION NOTE: 6.1. a) b) The crane MUST be kept clean and dry and must be maintained in accordance with these instructions. LUBRICATION. Oil all working parts monthly. The ram is filled with oil and should only require occasional topping up. DO NOT use brake fluid, as this will damage the hydraulic seals and invalidate the warranty. Proceed as follows: a) Use only good quality hydraulic jack oil available from your supplier.
PAGE 4
Environmental Protection Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely unserviceable and requires disposal, drain off any fluids (if applicable) into approved containers and dispose of the product and the fluids according to local regulations.
PAGE 5
EC DECLARATION OF CONFORMITY We the sole importers into the UK, hereby declare that the equipment described below Static Mounted Crane 450kg Description and Function: .................................................................................................................................................. SSC450 Model/Type: .......................................................................................................................................................................
PAGE 6
EC DECLARATION OF CONFORMITY We the sole importers into the UK, hereby declare that the equipment described below Static Mounted Crane 900kg Description and Function: .................................................................................................................................................. SSC900 Model/Type: .......................................................................................................................................................................
PAGE 7
PARTS FOR : STATIC MOUNTED CRANE 450KG MODEL : SSC450 ISSUE : ISSUE DATE : ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 PART NO SSC450.01 SSC450.02 SSC450.03 SSC450.04 SSC450.05 SSC450.06 SSC450.07 SSC450.08 SSC450.09 SSC450.10 SSC450.11 SSC450.12 SSC450.13 SSC450.14 SSC450.15 SSC450.
PAGE 8
PARTS FOR : STATIC MOUNTED CRANE 900KG MODEL : SSC900 ISSUE : ISSUE DATE : ITEM PART NO DESCRIPTION 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 SSC900.01 SSC900.02 SSC900.03 SSC900.04 SSC900.05 SSC900.06 SSC900.07 SSC900.08 SSC900.09 SSC900.10 SSC900.11 SSC900.12 SSC900.13 SSC900.14 SSC900.15 SSC900.