Instructions

3/4”SQ DRIVE AIR IMPACT WRENCH
MODEL NO: SA4.V2
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
I
MP
PO
R
RTA
A
NT:
PLEA
S
E READ THE
S
E IN
S
TRU
C
TI
O
N
S
C
AREFULLY. N
O
TE THE
S
AFE
O
PERATI
O
NAL RE
Q
UIREMENT
S
, WARNIN
GS
&
C
AUTI
O
N
S
. U
S
E
TH
HE
P
PR
O
ODU
C
T
CO
RRE
C
TLY AND WITH
C
ARE F
O
R THE P
U
RP
OS
E F
O
R WHI
C
H IT I
S
INTENDED. FAIL
U
RE T
O
D
O
SO
MAY
C
A
US
E DAMA
G
E AND
/O
R
PE
ER
S
SON
N
AL IN
JU
RY AND WILL INVALIDATE THE WARRANTY. KEEP TH
ESE
IN
STR
UCT
ION
S S
AFE
FO
R F
U
T
U
RE
USE
.
1. SAFETY
 Follow all workshop safety rules, regulations and conditions when using this wrench.
 WARNING! Disconnect from air supply before changing accessories or servicing.
 Maintain the wrench in good condition and replace any damaged or worn parts. Use genuine parts only. Unuthorised parts may be
dangerous and will invalidate the warranty.
 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.
 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each use and ensure that all connections are secure.
 Only use impact sockets which are specifi cally designed for use with an impact wrench.
 Wear approved safety eye/face shield, ear defenders and hand protection.
 WARNING! Due to the possible presence of asbestos dust from brake linings, when working around vehicle brake systems we
recommend you wear suitable respiratory protection
 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.
 Keep children and non essential persons away from the working area.
 DO NOT use the wrench for a task it is not designed to perform.
 WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).
 DO NOT use wrench unless you have been instructed in its use by a qualified person.
 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.
 DO NOT operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating medication.
 DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional starting.
 DO NOT direct air from the air hose at yourself or others.
 When not in use disconnect from air supply and store in a safe, dry, childproof location.
2. INTRODUCTION
Suitable for heavy garage and tyre shop use. Fitted with rocking-dog hammer mechanism with hardened anvil and cage. Features variable
air/torque control and reversible action. Polished aluminium housing.
3. SPECIFICATION
Model No: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SA4.V2
Drive: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4”Sq
Maximum Torque:. . . . . . . . . . . . . . . . . . . . . . 520lb.ft (707Nm)
Breakaway Torque: . . . . . . . . . . . . . . . . . . . . 540lb.ft (734Nm)
Free Speed: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4500rpm
Air Consumption: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7cfm
Operating Pressure: . . . . . . . . . . . . . . . . . . . . . . . . (6bar) 90psi
Air Inlet Size: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4”BSP
Nett Weight: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5kg
Vibration: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.89m/s²
Uncertainty: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.59m/s²
Noise Power: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107dB(A)
Noise Pressure: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96dB(A)
SA4.V2 Issue 7 28/07/2021
Original Language Version
© Jack Sealey Limited
Refer to
instructions
Wear eye
protection
Wear protective
gloves
Wear ear
protection
Wear a mask Wear safety
boots
Heavy item