User Manual

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS,

WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH

IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE

THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

 Follow all workshop safety rules, regulations and conditions when using this wrench.

 WARNING!Disconnect from air supply before changing accessories or servicing.

 Maintain the wrench in good condition and replace any damaged or worn parts. Use

genuine parts only. Unuthorised parts may be dangerous and will invalidate the warranty.

 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.

 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each

use and ensure that all connections are secure.

 Only use impact sockets which are specifically designed for use with an impact wrench.

 Wear approved safety eye/face shield, ear defenders and hand protection.

 WARNING! Due to the possible presence of asbestos dust from brake linings, when working

around vehicle brake systems we recommend you wear suitable respiratory protection

 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

 Keep children and non essential persons away from the working area.

 DO NOT use the wrench for a task it is not designed to perform.

 WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).

 DO NOT use wrench unless you have been instructed in its use by a qualified person.

 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.

 DO NOT operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating

medication.

 DO NOT carry wrench with your hand on the power trigger in order to avoid unintentional

starting.

 DO NOT direct air from the air hose at yourself or others.

 When not in use disconnect from air supply and store in a safe, dry, childproof location.

INSTRUCTIONS FOR:

HEAVY DUTY 3/4” AIR

IMPACT WRENCH

MODEL No: SA4.V2

2. INTRODUCTION & SPECIFICATIONS

Drive Size: .......................3/4”Sq

Working/Max Torque: (570/705Nm)420/520lb.ft

Ultimate Torque: ...........(730Nm) 540lb.ft

Free Speed: ....................4500rpm

Air Consumption: ................... 7cfm

Operating Pressure: ........... (6bar) 90psi

Air Inlet Size: ..............1/4”BSP

Weight: .....................4.5kg

Noise Power: .......... 104.39dB(A)

Noise Pressure: ......... 93.39dB(A)

Suitable for heavy garage and tyre-shop use. Fitted with rocking-dog type clutch mechanism with

hardened anvil and cage. Features four-position adjustable air/torque control and reversible

action. Polished aluminium housing with textured grip.

Original Language Version

SA4.V2 Issue: 5 (SP) -

06/09/13

Jack Sealey Limited 2013

Summary of content (4 pages)

PAGE 1
INSTRUCTIONS FOR: HEAVY DUTY 3/4” AIR IMPACT WRENCH Model No: SA4.V2 Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
PAGE 2
3. PREPARING WRENCH FOR USE 3.1. Air Supply Recommended hook-up procedure is shown in fig 1. 3.1.1. Ensure wrench air valve (or trigger) is in the "off" position before connecting to the air supply. 3.1.2. You will require an air pressure of 90psi, and an air flow according to specification. 3.1.3.  WARNING! Ensure the air supply is clean and does not exceed 90 psi while operating the wrench.
PAGE 3
5. MAINTENANCE WARNING! Disconnect wrench from air supply before changing accessories, servicing or performing maintenance. Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty. 5.1. If the air supply does not have an oiler, lubricate the air wrench daily with a few drops of Sealey air tool oil dripped into the air inlet. 5.2. Clean the wrench after use. DO NOT use worn, or damaged sockets. 5.3.
PAGE 4
WARNING! – Risk of Hand Arm Vibration Injury. This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately. This tool is to be operated in accordance with these instructions. Measured vibration emission value (a): . . . . . . . . . . . . . . . . . . 4.89m/s² Uncertainty value (k): . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.593m/s² Please note that the application of the tool to a sole specialist task may produce a different average vibration emission.