User Manual

ManualsBrandsSealey ManualsToolsSA51

Compact wrench weighs just 8.1kg, manufactured from a composite and aluminium housing. Fitted

with soft grip handles to help reduce vibration and chill effects. Features twin hammer function

providing extremely high output ideal for commercial and agricultural use. Twist controls for simple

choice of speed and direction.

Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions

and properly maintained, give you years of trouble free performance.

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL

REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE

PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR PERSONAL

INJURY AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

1. SAFETY INSTRUCTIONS

 Follow all workshop safety rules, regulations, and conditions when using wrench.

 WARNING! Disconnect from air supply before changing accessories or servicing.

 Maintain the wrench in good condition and replace any damaged or worn parts. Use

genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.

 WARNING! Check correct air pressure is maintained and not exceeded. We recommend 90psi.

 Keep air hose away from heat, oil and sharp edges. Check air hose for wear before each

use and ensure that all connections are secure.

 Only use impact sockets which are specifically designed for use with an impact wrench.

 Wear approved safety eye/face shield, ear defenders and hand protection.

 WARNING! Due to the possible presence of asbestos dust from brake linings, when working

around vehicle brake systems we recommend you wear suitable respiratory protection.

 Maintain correct balance and footing. Ensure the floor is not slippery and wear non-slip shoes.

 Keep children and non essential persons away from the working area.

 DO NOT use the wrench for a task it is not designed to perform.

 WARNING! DO NOT use wrench if damaged or thought to be faulty. (Contact Service Agent).

 DO NOT use wrench unless you have been instructed in its use by a qualified person.

 DO NOT carry the wrench by the air hose, or yank the hose from the air supply.

 DO NOT operate wrench if you are tired or under the influence of alcohol, drugs or intoxicating

medication.

 DO NOT carry wrench with your hand on the trigger in order to avoid unintentional starting.

 DO NOT direct air from the air hose at yourself or others.

 When not in use disconnect from air supply and store in a safe, dry, childproof location.

INSTRUCTIONS FOR:

AIR IMPACT WRENCH 1"SQ DRIVE

TWIN HAMMER-COMPACT

MODEL No: SA686

2. INTRODUCTION

Original Language Version

SA686 Issue: 4(SP) - 16/12/13

Summary of content (4 pages)

PAGE 1
INSTRUCTIONS FOR: AIR IMPACT WRENCH 1"SQ DRIVE TWIN HAMMER-COMPACT MODEL No: SA686 Thank you for purchasing a Sealey Product. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS AND CAUTIONS. USE THIS PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
PAGE 2
3. SPECIFICATION Drive Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1”Sq Working/Max Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1800/2000lb.ft Speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5000rpm Air Consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PAGE 3
 DO NOT use any additional force upon the wrench in order to remove a nut. DO NOT allow wrench to free run for an extended period of time as this will shorten its life. WARNING! Disconnect wrench from air supply before changing accessories, servicing or performing maintenance. Replace or repair damaged parts. Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty. 6. MAINTENANCE 6.1.
PAGE 4
WARNING! – Risk of Hand Arm Vibration Injury. This tool may cause Hand Arm Vibration Syndrome if its use is not managed adequately. This tool is subject to the vibration testing section of the Machinery Directive 2006/42/EC. This tool is to be operated in accordance with these instructions. Measured vibration emission value (a): . . . . . . . . . 14.5 m/s² Uncertainty value (k): . . . . . . . . . . . . . . . . . . . . . . . . . 1.