Instruction Manual

Original Language Version
© Jack Sealey Limited
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500 01284 703534 [e-mail] www.sealey.co.uk
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
WEEE REGULATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
BATTERY REMOVAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak’s registered compliance scheme. Jack
Sealey Ltd Batteries Producer Registration Number (BPRN) is BPRN00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.
Important: No Liability is accepted for incorrect use of this product.Please note that other versions of this product are available. If you require
documentationforalternativeversions,pleaseemailorcallourtechnicalteamon[e-mail]or01284757505.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Partssupportisavailableforthisproduct.Pleaselogontowww.sealey.co.uk,email[e-mail]ortelephone01284757500
5.11. CABLES Refer to (g.2)
5.11.2.1. Disconnect the cable from the line, also disconnect the
opposite end to avoid errors due to leakage from other
 equipment.Checkeachconductortogroundand/orlead 
sheath by connecting one insulation tester lead to a ground
 and/orleadsheathandtheotherinsulationtesterleadto 
each of the conductors in turn. Check insulation resistance
between conductors by connecting insulation tester leads to
conductors in pairs.
g.2
TA319.V2Issue2(5,4)12/08/22
Insulation Tester