User's Manual

Protecting one image/video clip

You can protect the image/video clip from being accidentally erased by using the

protect function in the Playback menu. Follow the steps below to perform

protect function:

Protecting one image/video clip

1. Turn the mode dial to mode and power on

the camera.

■ The last image/video clip appears on the LC D

monitor.

2. Select the image/video clip you wish to protect

by using the / but ton.

3. Press the button. Select Protect by using

the / button.

4. Press the button. Use the / button to

select One image and then press the button.

■ Once the image/video clip is protected, the

protection icon will display on the protected

image/video clip.

■ To protect all images, select All images in this

step.

5. Select Lock by pressing the / button and

then press OK.

■ Once the image/video clip is protected, the

protection icon will display on the protected

image/video clip.

Removing protection from one image/video clip

1. Perform the steps above 1 to 4 in “ Protecting one image/video clip. ”

2. Select Unlock by pressing the / button and then press OK.

• Use of the format function will erase protected images/video clips. For more

information about the f ormat “ Function” refer to format in t he set-up menu.