User's Manual

50
Format
This option formats the internal memory ( or
memory card ) and erases all stored images
and data. To perform the format function, first
press the button. Then select [ Yes ] by
using the / button and press OK. A
progress bar displays, showing the progress of
formatting.
Beep
The camera makes a sound ( beep ) each time
you press the camera button if this function is
enabled. Press the button. Select [ On ] or
[ Off ] by using the / button and then press
OK.
Power off
If the camera goes unused for a certain period
of time while the camera is powered on, the
camera will switch to an idle mode, and even-
tually turn itself off to conserve power.
Inactivity period Inactivity period Camera status
(batteries) (AC power adapter)
60 seconds 60 seconds stay idle
3 minutes 30 minutes shut off
If the camera is idle, re-activate the camera by pressing any button or switch the
mode dial. If the camera has powered-off you must turn t he camera on again by
pressing the button. The table ( above ) shows the default time settings for idle,
and power-off. To change the power saving interval, first press the button.
Then select the power-off interval you prefer by using the / button and
press OK.
[ 3 min ] , [ 5 min ] , [ 10 min ] , [ 30 min ]