Operation Manual

EN-17
Inserting and Removing an SD Memory Card (Optional
Accessory)
The digital camera comes with 16MB of internal memory (14MB available for image
storage), allowing you to store captured still images or video clips in the digital camera.
It is recommended to expand the memory capacity by using an optional SD (Secure
Digital) memory card so that you can store more files.
1. Make sure your camera is turned off
before inserting or removing a memory
card.
2. Open the waterproof door and then the
inside battery cover.
3. Insert an SD memory card in the correct
orientation as shown in the illustration.
4. Close both the battery and battery/SD
card covers and lock the latch.
 To remove the SD memory card,
make sure the camera is turned
off. Press lightly on the edge of the
memory card and it will eject.
Important: Use only SanDisk, Panasonic or Toshiba brand SD memory cards up
to 1GB in size. Other brands and larger SD Memory cards may work fine but their
compatibility and performance can not be guaranteed with the camera.
 Be sure to format an SD memory card with
this digital camera before using it. Refer to
section in the manual titled “Formatting an
SD Memory Card or Internal Memory” for
further details.
 To prevent valuable data from being
accidentally erased from an SD card, you
can slide the write protect tab (on the side of
the SD memory card) to “LOCK”.
 To save, edit, or erase data on an SD
memory card, you must unlock the card.