SL07, SLC310 & SLC410 Marine Lanterns Installation & Service Manual Version 2.
Version No. 1.0 1.1 1.2 1.3 1.4 2.0 Description Manual Launch: SLC410 added & IR Control Addition of Configuration Settings Information Configuration Settings update Addition of LUX Table Update to Max Intensities & Addition of Automatic Intensity Reduction GPS as standard Date March 2012 April 2012 April 2012 April 2012 June 2012 Approved C. Procter S. Turner C. Procter J. Dore C. Procter Nov 2012 C.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Table of Contents Introduction........................................................................................................ Page 4 Operating Principle........................................................................................... Page 4 Technology......................................................................................................... Page 4 SL07 Model...........................................................
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Introduction Congratulations! By choosing to purchase a Sealite lantern you have become the owner of one of the most advanced LED marine lanterns in the world. Sealite Pty Ltd has been manufacturing lanterns for over 25 years, and particular care has been taken to ensure your lantern gives years of service.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns SL07 Model 1-5nm+ LED Light Fixture The SL07 LED light fixture is designed to offer superior visibility and operate in conjunction with existing or purpose-built power supplies. With a variable range of 1-5nm+, a maintenance-free light source, and choice of up to 256 user-adjustable flash codes, the SL07 is available in a number of configurations, colours and cable lengths and is the preferred replacement for obsolete incandescent lights.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns SPECIFICATIONS • Light Source Available Colours Maximum Available Intensity (cd)† Visible Range (nm) Horizontal Output (degrees) Vertical Divergence (degrees) Available Flash Characteristics Intensity Adjustments LED Life Expectancy (hours) 1 LED Red, Green, White, Yellow, Blue Red - 121 Green - 88 White - 176 Yellow - 95 1-5+ 360 7 Up to 256 IALA recommended (user adjustable) Adjustable in 25% increments >100,000 Current Draw (mA) Circuit Protec
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns SLC310 & SLC410 Models Compact 3-5nm+ Solar Marine Lanterns The robust design of this self-contained light ensures up to 12 years of reliable service with minimal ongoing maintenance. Specifically designed to survive the harshest environment the SLC310 and SLC410 feature seven stage powder coated aluminium Top, Base and Internal Aluminium Chassis. The corners are made from UV stabilised rubber.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns SLC410 Model Single LED Optic Robust 7-stage powder-coated aluminium chassis with rubber extruded corners SLC310 Model High visibility IALA colours 4 x 5watt (20watts total) multicrystalline solar modules, ensuring maximum light collection to charge the battery 4 x 3watt (12watts total) multicrystalline solar modules, ensuring maximum light collection to charge the battery Internal 24Ah battery 3 & 4 hole bolt pattern on 200 mm OD base for eas
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns SPECIFICATIONS • SLC310 SLC410 1 LED Red, Green, White, Yellow, Blue Red - 121 Green - 88 White - 176 Yellow - 95 3–5+ 360 7 Up to 256 IALA recommended (user adjustable) Adjustable in 25% increments >100,000 1 LED Red, Green, White, Yellow, Blue Red - 121 Green - 88 White - 176 Yellow - 95 3–5+ 360 7 Up to 256 IALA recommended (user adjustable) Adjustable in 25% increments >100,000 Current Draw at advertised intensity (mA) Night Off Current (E
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Installation of SLC310 & SLC410 Models Charging the Battery New lanterns should be left in the sun for 1-2 days to ensure battery is charged before placing in service. Please note, lantern will re-charge even when toggle switch is turned to ‘OFF’ position. Preferred Installation Location For best lantern performance, ensure solar modules are not covered and are in clear view of the sky with no shadows.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Selecting an Intensity/Power Setting SL07, SLC310 & SLC410 Models Intensity/power settings on Sealite lanterns operate via DIP switches, located near the rotary switches on the flasher unit. The intensity/power settings may be used to reduce the power consumption and intensity of the lantern. Setting the lantern to 25% intensity will reduce the power consumption to 25% of the normal 100% setting and the range by 25%.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Selecting a Flash Code - Rotary Switches A & B SL07, SLC310 & SLC410 Models All lanterns have 2 rotary switches marked A and B on the flasher unit. Turning the small arrows to the appropriate number or letter will set the code. The unit may take up to one minute to activate a new flash code. A comprehensive list of available flash codes is listed on in the ‘Flash Codes’ section of this manual. 2.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Flash Codes The Sealite SL07, SLC310 & SLC410 may be set to any of 256 IALA recommended flash settings which are user-adjustable onsite without the need for external devices. SEALITE® code reference is listed by number of flashes For the latest version of this document visit www.sealite.com or email info@sealite.com Symbols FL Flash followed by number Eg.
IR SWITCH Controller A B 0 0 0 D 3 211 E 3 227 F 3 243 7 3 115 8 3 131 9 3 147 A 3 163 8 4 132 B 3 179 9 4 148 C 3 195 F 4 244 1 0 16 0 5 5 0 4 4 2 0 32 3 0 48 4 0 64 5 0 80 6 0 96 7 0 112 1 2 18 8 0 128 9 0 144 D 6 214 1 5 21 A 0 160 2 5 37 B 0 176 3 5 53 C 0 192 D 0 208 2 2 34 5 4 84 E 2 226 4 6 70 4 5 69 5 5 85 E 0 224 F 0 240 6 5 101 0 1 1 1 1 17 2 1 33 3 2 50 3 6 54 F 2 242 3 1 49 8 5 133 4 1 65 5 1 81 9 5 149 6 1 97 FLASH CODE ON OFF F (Steady light) VQ 0.5 S VQ 0.6 S VQ 0.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns SWITCH A B 0 A E B 1 A 2 A 3 A F 9 2 C 4 A 0 7 1 7 9 B 2 9 5 A 7 8 A A 6 A 7 A 9 9 2 8 3 7 3 9 A 9 7 B 8 A 4 7 8 8 5 7 4 C 5 C F B 9 A 6 7 7 7 6 9 8 7 B 9 9 7 4 9 B A C 9 D 9 A 8 A 7 8 B C A D A SWITCH A B 7 9 5 9 0 C E 9 3 C 2 B IR Controller 10 235 26 42 58 249 44 74 7 23 155 41 90 120 170 106 122 153 40 55 57 169 123 138 71 136 87 76 92 251 154 103 119 105 135 185 151 73 186 201 217 168 167 139 202 218 IR Controller 121 89 12 233 60 43 FLASH CO
SWITCH A B A B F A 0 B B 7 B 8 C 8 C B C 7 D B D 7 3 8 8 9 B B D 8 1 B E A E 7 B 6 4 8 5 8 1 8 F 7 9 D 0 8 F 8 0 9 1 9 6 8 1 C 4 B 3 B 5 B 6 B SWITCH A B B F B D 8 D 1 D 2 D F E B E 4 F C E 3 D A D 4 D 8 E 7 D D E C D 5 D 0 D 3 F 0 F E E 6 F IR Controller FLASH CODE ON OFF ON OFF ON OFF 171 250 11 183 184 200 203 199 219 215 56 137 187 216 27 234 231 182 72 88 24 247 157 8 248 9 25 104 28 75 59 91 107 Q (3) 6 S FL (3) 8 S FL (3) 9 S FL (3) 9 S FL (3) 10 S FL (3) 10 S FL (3) 10 S FL (3) 10 S FL (3
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns IR SWITCH Controller A B D D 221 E D 237 E 8 232 5 F 95 9 F 159 9 E 158 IR SWITCH Controller A B F D 253 A F 175 7 F 127 IR SWITCH Controller A B 6 E 110 7 E 126 2 F 47 2 E 46 3 E 62 8 F 143 IR SWITCH Controller A B 4 E 78 5 E 94 1 F 31 0 E 14 1 E 30 IR SWITCH Controller A B FLASH CODE ON OFF ON OFF ON OFF ON OFF ON OFF Q (5) 7 S Q (5) 10 S FL (5) 12 S FL (5) 20 S FL (5) 20 S FL (5) 20 S 0.3 0.3 0.5 0.5 0.8 1.0 0.7 0.7 1.5 0.5 1.2 1.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns GPS Synchronisation SL07, SLC310 & SLC410 Models The SL07, SLC310 and SLC410 models come with GPS fitted as standard, and provide the user with the ability to install independently operating lanterns that all flash in synchronisation.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Lantern Status Two status LED’s on the main printed circuit board provide the operator with an indication of the lantern status. There is one red and one yellow status LED. The red status LED is used to indicate the health of the lantern’s power system. The yellow status LED is used to indicate the operational status of the lantern. These indicator LED’s can be viewed at the base of the lens. Latest products and information available at www.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns All Sealite boards are fitted with two Indicator LED’s. These are positioned near the Flash Code Rotary Switches. Use the table below to help determine operational status. Yellow LED Lantern Status Lantern OFF Normal OFF Lantern is in Daylight and in Dusk till Dawn mode or in Standby Mode Flashing ON 0.15 seconds OFF 0.15 seconds Normal OFF Light is activating and will turn on after detecting 30 seconds of continuous darkness.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Optional IR Remote Control SL07, SLC310 & SLC410 Models The IR remote is used to communicate with Sealite lighting products that have an IR sensor fitted. The remote control is used for the following functions: Test / Configure • Flash Code: read the current flash code, configure a new flash code. • Lamp Intensity: read the current lamp intensity, configure a new intensity level.
1 1 4 1 4 4 7 7 R 7 R FC 1R C FC 4 SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns IR Controller Functions T/C T/C 2 T/C 3 T/C 2 3 15 3 6 2 Access2 3 T/C Security 5 6 48 5 T/C 6 159 26 8 9 9 8 T/C 170 2 3 489L 51 T/C L 0 Normal Operation R 0 4L 1 2 3 40I T/C 5 6 2 3 7BL 8 I B Read FC B T/C 1 2 3 4I T/C 5 6 RBI 07 5 6 7 8 9 Test Mode / Configure Pressing the T/C button for upto 5 seconds places the light in Test Mode.
1 4 1 7C 4 R2 7 R5C 1 8C 4 0 7 R C 4 R Flash Code 7 FC T/C R 5 0 8 I 0 6 L 9 B L T/C SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns This key sets the flash code on the light. Example Key sequence: 2 T/C FC 3I 1 2B 5 2 6 3 4 5 8 5 9 6 7 03 8 T/C 06I 9LR T/C 3 This sets the flash code to value 123. The light responds by flashing the flash code value.
8 SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns 9 Lux 0 I L This key sets the Ambient Light levels for the light. The format is L <1 (Lux D-N) or 2 (Lux N-D)> T. B There are 9 programmable lux levels for both the night - day and day – night transitions. The levels 1 to 9 represent increasing Lux levels. The Lux range between levels 1 and 9 is approximately 50 Lux. The nominal and factory preset value is 5.
7 R C 8 SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns T/C 9 Error Indication If the key sequence is invalid, or an out of bounds value is attempted to be set, the light flashes 5 times for 1 second. (The command then needs to be sent from the start.) 1 0 2L 3 4I 5B 6 T/C Example key sequence: (Set the intensity level to 5 – undefined.) Configuration Settings The light flashes 5 times for 1 second.
1 2 T/C 3 T/C 15 26 SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns 3 4 GPS Synchronisation Control and Status 1 7 The lantern must be in Test mode and the Security Access code accepted prior to pressing any of the following key sequences. However, the lantern will return to Normal Operation if it has not detected a valid key press for a period of 30 seconds.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns The following table explains the flash codes response from the lantern: Lantern Flash Response Description One, 4 second flash GPS disabled. The GPS synchronisation module is disabled. The lantern will be unable to synchronise with other lanterns. One, 1 second flash GPS enabled, not synchronised, invalid UTC status Initialising, stage 1 No valid time stamp data has been received from a satellite.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Maintenance & Servicing SL07 Model Designed to be maintenance free, the SL07 requires minimal attention, though the following maintenance and servicing information is provided to help ensure the life of your product. 1. Cleaning Lens- occasional cleaning of the light lens may be required. Using a cloth and warm soapy water, wipe off any foreign matter before rinsing the lens with fresh water. 2.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns SLC310 & SLC410 Models Designed to be almost maintenance-free, the SL310 and SLC410 require minimal attention, though the following maintenance and servicing information is provided to help ensure the life of your Sealite product. 1. Cleaning Solar Panels- occasional cleaning of the solar panels may be required. Using a cloth and warm soapy water, wipe off any foreign matter before rinsing the panels with fresh water. 2.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Solar Panel Replacement (SLC310 & SLC410 Models) The SLC310 and SLC410 are built around an internal aluminium chassis. The solar panels can be user-replaced in the unlikely event that one is broken or damaged during the product’s life. Follow the steps below or contact support@sealite.com for more details. 1. Remove 4 x M6 x 20 socket head cap screws and 4 x M6 nylon washers and disconnect the light head from the chassis 2.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns How to Change the Regulator (SLC310 & SLC410 Models) 1. Remove the 4 x M6 x 20 socket head cap screws and 4 x M6 nylon washers, then disconnect the light head from the chassis. 2. Remove the 2 x M4 x 20 socket head cap screws, 2 x M4 spring washers and 2 x M4 penny washers then remove the upper battery bracket containing the regulator. 3. Disconnect the battery. 4. Take note of the wire colours and location in the regulator. 5.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Trouble Shooting SL07 Model Problem Remedy Lantern will not activate. • • • • • • Timing codes will not change. • Turn rotary switches several times to ensure contacts are clear. Lantern will not operate for the entire night. • Reducing the light output intensity or duty cycle (flash code) will reduce current draw on the battery. Ensure internal toggle switch is set to the ‘ON position. Ensure lantern is in darkness.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Notes Latest products and information available at www.sealite.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Sealite LED Light Warranty V2.1 Activating the Warranty Upon purchase, the Sealite Pty Ltd warranty must be activated for recognition of future claims. To do this you have two (2) options: 1. Postal Registration - please complete the Sealite Warranty Registration Card and return to Sealite within 30 days of your purchase. 2. Online Registration - please complete the Online Registration Form at; www.sealite.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns 3. The customer must give Sealite Pty Ltd notice of any defect with the product within 30 days of the customer becoming aware of the defect. 4. Rechargeable batteries have a limited number of charge cycles and may eventually need to be replaced. Typical battery replacement period is 3-4 years. Long term exposure to high temperatures will shorten the battery life.
SL07, SLC310 & SLC410 Compact 3-5nm+ Solar Marine Lanterns Other Sealite Products Available Marine Lanterns (1-12nm+) Monitoring & Control Systems Bridge & Barge Lights Marine Buoys (up to 3mt in diameter) Area Lighting Mooring Systems & Accessories Head Office Sealite Pty Ltd 11 Industrial Drive Somerville, Vic 3912 Australia Tel: +61 3 5977 6128 Fax: +61 3 5977 6124 Email: info@sealite.com Internet: www.sealite.com Latest products and information available at www.sealite.
