Service manual

Latest products and information available at www.sealite.com
25
SLC500 & SLC600
Solar Marine Lanterns
Trouble Shooting
Problem Remedy
Lantern will not activate. • Ensurelanternisindarkness.
• Waitatleast60secondsfortheprogramtoinitialiseindarkness.
• Ensureswitchsettingisonavalidcode(notunusedashcode).
• Ensurebatteryterminalsareproperlyconnected.
• Ensurebatteryvoltageisabove12volts.
Timing codes will not change. • Turnrotaryswitchesseveraltimestoensurecontactsareclear.
Lantern will not operate for the
entire night.
• Exposelanterntodirectsunlightandmonitoroperationforseveraldays.
Sealite products typically require 3.0 hours of direct sunlight per day to
retain full autonomy. From a discharged state, the lantern may require
severaldaysofoperationalconditionsto‘cycle’uptofullautonomy.
• Reducingthelightoutputintensityordutycycle(ashcode)willreduce
current draw on the battery.
• Ensuresolarmoduleiscleanandnotcoveredbyshadingduringtheday.